Dual Electronics XDMAR6720 - Manual (Page 2)

2
XDMAR6720 INSTALLATION
TYPICAL FRONT-LOAD DIN MOUNTING METHOD
Please read entire manual before installation.
Before You Start
• Disconnect negative battery terminal. Consult a qualified technician for instructions.
• Avoid installing the unit where it would be subject to high temperatures, such as from
direct sunlight, or where it would be subject to dust, dirt or excessive vibration.
Preparation
Removal Keys
Head Unit
Mounting Sleeve
Dashboard or Installation Kit
Getting Started
• Remove trim ring from unit.
• Insert the supplied keys into the slots
as shown, and slide the unit out of
the mounting sleeve.
• Install mounting sleeve into opening,
bending tabs to secure.
• Connect wiring harness and
antenna. Consult a qualified
technician if you are unsure.
• Certain vehicles may require an
installation kit and/or wiring
harness adapter (sold separately).
• Test for correct operation and slide
into mounting sleeve to secure.
• Snap trim ring into place.