Rainbow Electronics LM3815 - Manual (Page 2)

Ordering Information
Order No. # Sense
Range
Sampling
Interval*
Sensing
Method
NS
Package
Number ‡
Package
Type
Supplied As:
LM3814M-1.0 ± 1A 6 ms High-side M08A SO-8 95 units in Rails
LM3814MX-1.0 ± 1A 6 ms High-side M08A SO-8 2.5k units on Tape and Reel
LM3814M-7.0 ± 7A 6 ms High-side M08A SO-8 95 units in Rails
LM3814MX-7.0 ± 7A 6 ms High-side M08A SO-8 2.5k units on Tape and Reel
LM3815M-1.0 ± 1A 6 ms Low-side M08A SO-8 95 units in Rails
LM3815MX-1.0 ± 1A 6 ms Low-side M08A SO-8 2.5k units on Tape and Reel
LM3815M-7.0 ± 7A 6 ms Low-side M08A SO-8 95 units in Rails
LM3815MX-7.0 ± 7A 6 ms Low-side M08A SO-8 2.5k units on Tape and Reel
# Suffix M indicates that the part is available in Surface
Mount package. Suffix X indicates that the part is available in
2.5k units on Tape and Reel.
* Current is sampled over a fixed interval. The average
current during this interval is indicated by the duty cycle of
the PWM output during next interval.
‡ The Package code M08A is internal to National Semicon-
ductor and indicates an 8-lead surface mount package,
SO-8.
Pin Description (High-Side, LM3814)
Pin Description (High-Side, LM3814)
Pin Name Function
1 SENSE+, V
DD
High side of internal current sense, also supply voltage.
2 SENSE− Low side of internal current sense.
3 FLTR+ Filter input — provides anti-aliasing for delta sigma modulator.
4 FLTR− Filter input.
5 SD Shutdown pin. Connected to V
DD
through a pull up resistor for normal operation. When
low, the IC goes into a low current mode (typically 3 µA).
6 PWM PWM output indicates the current magnitude and direction.
7 GND Ground
8 GND Ground
Pin Description (Low-Side, LM3815)
Pin Description (Low-Side, LM3815)
Pin Name Function
1 SENSE+, GND High side of internal current sense, also ground.
2 SENSE− Low side of internal current sense.
3 FLTR+ Filter input – provides anti-aliasing for delta sigma modulator.
4 FLTR− Filter input.
5 SD Shutdown pin. Connected to V
DD
through a pull up resistor for normal operation. When
low, the IC goes into a low current mode (typically 3 µA).
6 PWM PWM output indicates the current magnitude and direction.
7 GND Ground
8 V
DD
V
DD
(supply)
LM3814/LM3815
www.national.com 2