Rainbow Electronics MAX518 - Manual (Page 3)

MAX517/MAX518/MAX519
2-Wire Serial 8-Bit DACs with
Rail-to-Rail Outputs
_______________________________________________________________________________________ 3
ELECTRICAL CHARACTERISTICS (continued)
(V DD = 5V ±10%, V REF_ = 4V (MAX517, MAX519), R L = 10k Ω, C
L = 100pF, T A = T MIN to T MAX , unless otherwise noted.
Typical values are T A = +25°C.)
0.6 I SINK = 6mA
I SINK = 3mA
0.3V DD
Input High Voltage V IH 0.7V DD V
Input Leakage Current I IN ±10 µA
Output Low Voltage V OL
0.4
V
Three-State Leakage Current I L ±10 µA
Three-State Output Capacitance C OUT 10
0V ≤ V
IN
≤ V
DD
V IN = 0V to V DD
(Note 6)
PARAMETER SYMBOL MIN TYP MAX UNITS
Output Leakage Current ±10 µA
CONDITIONS
OUT_ = 0V to V DD , power-down mode
pF
LSB
1.5
V IL
Input Hysteresis V HYST 0.05V DD V
Input Capacitance C IN 10 pF (Note 6)
Input High Voltage V IH 2.4 V
Input Low Voltage V IL 0.8 V
Input Leakage Current I IN ±10 µA V IN = 0V to V DD
Voltage Output Slew Rate
2.0
Positive and negative V/µs
MAX51 _C
Output Settling Time µs
Digital Feedthrough 5 Code = 00 hex, all digital inputs from 0V to V DD nV-s
1.4 MAX51 _E
1.0 MAX51 _M
Input Voltage Range 0 V DD V
Input Resistance R IN 16 24 k Ω Code = 55 hex (Note 2)
Input Current ±10 µA Power-down mode
Input Capacitance 30 pF Code = FF hex (Note 3)
Channel-to-Channel Isolation
(MAX519)
-60 (Note 4)
MAX51 _M, REF_ = V DD
(MAX517, MAX519), code = FF hex,
0µA to 500µA 2.0
AC Feedthrough -70
dB
(Note 5)
MAX51 _C/E, REF_ = V DD
(MAX517, MAX519), code = FF hex,
0µA to 500µA
Full-Scale Output Voltage 0 V DD V
Output Load Regulation
0.25 OUT_ = 4V, 0mA to 2.5mA
6 To 1/2 LSB, 10k Ω and 100pF load (Note 8)
DAC OUTPUTS
DIGITAL INPUTS SCL, SDA
DIGITAL INPUTS AD0, AD1, AD2, AD3
DIGITAL OUTPUT SDA (Note 7)
DYNAMIC PERFORMANCE
REFERENCE INPUTS (MAX517, MAX519)
dB
Input Low Voltage V