Rainbow Electronics DS75LV - Manual (Page 2)

DS75LV: Digital Thermometer and Thermostat
2 of 13
ABSOLUTE MAXIMUM RATINGS*
Voltage on V
DD
, Relative to Ground -0.3V to +4.0V
Voltage on Any Other Pin, Relative to Ground -0.3V to +6.0V
Operating Temperature Range -55 °C to +125°C
Storage Temperature Range -55 °C to +125°C
Soldering Temperature 260 °C for 10 seconds
These are stress ratings only and functional operation of the device at these or any other conditions above those indicated in the operation
sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability.
The Dallas Semiconductor DS75LV is built to the highest quality standards and manufactured for long-term
reliability. All Dallas Semiconductor devices are made using the same quality materials and manufacturing
methods. However, the DS75LV is not exposed to environmental stresses, such as burn-in, that some industrial
applications require. For specific reliability information on this product, please contact the factory in Dallas at (972)
371-4448.
DC ELECTRICAL CHARACTERISTICS
(-55°C to +125°C; 1.7V £ V
DD
£ 3.7V.)
PARAMETER SYMBOL CONDITIONS MIN MAX UNITS
Supply Voltage V
DD
(Note 10) 1.7 3.7 V
-25 to +100 ± 2.0 Thermometer Error
(Note 2)
T
ERR -55 to +125 ± 3.0
°C
Input Logic High V
IH
(Note 1) 0.7 × V
DD
5.5 V
Input Logic Low V
IL
(Note 1) -0.5 0.3 × V
DD
V
V
OL1 3mA sink current 0 0.4
SDA Output Logic Low
Voltage (Note 1)
V
OL2 6mA sink current 0 0.6
V
O.S. Saturation Voltage V
OL
4mA sink current
(Notes 1, 2)
0.8 V
Input current each I/O pin 0.4 < V
I/O
< 0.9 V
DD
-10 +10 mA
I/O Capacitance C
I/O
10 pF
Standby Current I
DD1
(Notes 3, 4) 2 mA
Active Temp
Conversions
1000 Active Current
(Notes 3, 4)
I
DD
Communication only 100
mA
AC ELECTRICAL CHARACTERISTICS
(-55°C to +125°C; 1.7V
£ V
DD
£ 3.7V.)
PARAMETER SYMBOL CONDITION MIN TYP MAX UNITS
Resolution 9 12 bits
9-bit conversions 25
10-bit conversions 50
11-bit conversions 100
Temperature Conversion
Time
t
CONVT
12-bit conversions 200
ms
SCL Frequency f
SCL
400 KHz
Bus Free Time Between a
STOP and START
Condition
t
BUF
(Note 5)
1.3
ms
START and Repeated
START Hold Time from
t
HD:STA
(Notes 5, 6)
600
ns