Rainbow Electronics MAX8719 - Manual (Page 3)

MAX8718/MAX8719
High-Voltage, Low-Power Linear Regulators for
Notebook Computers
_______________________________________________________________________________________ 3
ELECTRICAL CHARACTERISTICS (continued)
(Circuit of Figure 1. V IN = 15V, I OUT = 5µA, T A = 0°C to +85°C . Typical values are at T A = +25°C, unless otherwise noted.) (Note 1)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
V IN = 6V, T A = +25 °C 210
Output Current Limit I LIM
V
OUT
= 0, V
IN
= 6V 125 340
mA
Output Reverse Leakage Current V OUT forced to 5.5V, IN = unconnected 70 µA
MAX8718 0.16
Capacitive Load Requirements
MAX8719 0.23
µF/mA
Startup Time Response
Rising edge of IN or SHDN to OUT within
spec limits, C
OUT = 10µF, R LOAD = 500 Ω,
V OUT = 5V
1 ms
Startup Output Overshoot
C OUT = 10µF, R LOAD = 500 Ω, OUT within
90% of the nominal output voltage
0.5 %
T
A
= +25 °C, rising edge only
0.88 ×
V
OUT
0.9 ×
V
OUT
0.92 ×
V
OUT
V CC Threshold (MAX8718)
0 °C < T
A < +85 °C, rising edge only
0.85 ×
V OUT
0.9 ×
V OUT
0.95 ×
V OUT
V
T A = +25 °C, rising edge only
0.88 ×
V
FB
0.9 ×
V
FB
0.92 ×
V
FB
V CC Threshold (MAX8719)
0 °C < T
A < +85 °C, rising edge only
0.85 ×
V FB
0.9 ×
V FB
0.95 ×
V FB
V
V CC to PGOOD Delay V TH to (V TH - 100mV) 4.5 µs
PGOOD Active-Timeout Period 100 185 300 ms
PGOOD Output Leakage Current PGOOD = 5.5V, V CC = 5.5V 0.1 µA
PGOOD Output Low Voltage I SINK = 1.6mA, V CC = GND 0.3 V
V CC Input Hysteresis 2 %
Thermal-Shutdown Threshold V SHDN = 0 or 15V, 20 °C hysteresis +165 °C
SHDN Input Low Voltage 0.25 V
SHDN Input High Voltage 1.4 V
SHDN Input Bias Current V SHDN = 0 or 15V, T A = 0 °C to +85°C -1 +0.1 +1 µA