TC Electronic BG250 - Manual (Page 12)

Quick Setup Guide
8
Quick Setup Guide
If you just can’t wait…
Here are a few quick steps to get you playing within
minutes.
Unpacking
■ Unpack your BH250 / BG250-208. The box should
contain the following items:
■
BH250 bass head or
BG250-208 bass combo
■ Power cable
■ Mini jack to mini jack cable
■ USB cable
■ Manual
■ Switch-3 sticker
■ Inspect all items for signs of transit damage. In the
unlikely event of this having occurred, inform the
carrier and supplier.
■ Keep all the packaging if damage has occurred, as
this will show evidence of excessive handling force.
■ It is also a good idea to keep the packaging for fu-
ture transportation.
Setting up
■ If you have purchased a BH250 bass head, connect
the Speaker Out jack on the BH250’s rear panel to a
cabinet or combination of cabinets with a minimum
impedance of 4 Ohms.
■ Connect the power cable to an outlet with correct
voltage. This device accepts voltages from 100 to
240 VAC.
■ Connect your bass to the INPUT jack on the front
panel.
■ Select Active or Passive pickup type using the GAIN
selector.
■ Adjust the output volume using the MASTER knob.
■ PLAY!