TC Electronic Trinity Reverb - Manual (Page 7)

Unpacking and setting up
Trinity Reverb English Manual Version 1.0 5
Unpacking and
setting up
Ready…
The Trinity Reverb box should contain the follow-
ing items:
– 1 Trinity Reverb pedal
– 2 rubber feet for “non-velcro” pedalboard
mounting
– 1 TC Electronic sticker
– 1 leaflet about TC’s guitar FX product range.
– 1 USB cable for transferring TonePrints from
the computer to the pedal and updating the
pedal firmware
Inspect all items for signs of transit damage. In
the unlikely event of transit damage, inform the
carrier and supplier.
If damage has occurred, keep all packaging as it
can be used as evidence of excessive handling
force.
Set…
– Connect a 9V power supply with the following
symbol to the DC input socket of Trinity Re-
verb.
! Please note that Trinity Reverb does not
come with a power supply.
– Plug the power supply into a power outlet.
– Connect your instrument to the MONO IN jack
on the right side of the pedal using a ¼“ jack
cable. You can also feed the pedal with a ste-
reo signal by using both IN jacks.
– Connect the MONO OUT jack on the left side
of the pedal to your amplifier using a ¼“ jack
cable.
Play!