TC Electronic FireworX - Manual (Page 43)

41
The I/O Setup display
The I/O Setup display contains four pages: MIDI - CTRL - LEVEL- SIGNAL. The four pages contain setups of all the
FireworX’s external connections. Use the < > Arrow keys to step between the four pages.
The MIDI page contains all global parameters i.e. basic MIDI channel, Program change offset, Bank selection, MIDI
Map etc.
The CTRL (Control) page contains control setup of all External Modifiers, the Alpha Mod. the global Tempo, the Block
Mute keys etc.
The Level page contains the Analog, the Digital In/Out level and displays the incoming sample rate when using
external clock
The Signal page contains the source select of the FireworX Input and Outputs, including the External Loop and
Dither.
All settings of the I/O Setup are global, i.e. they do not change with the Presets.
SYSTEM & MIDI I/O Setup
The Signal page
The Level page
“Signal” page selected
Input Source
External Clock
indicator
Samplerate source Dither
Signal is present on
these outputs
Input Channel
“Level” page selected
Analog Input/Output level indicators
Digital In/Out levels
Input gain range
+4dBu/-10dBV