TC Electronic FireworX - Manual (Page 22)

20
EFFECTS SETUP Effects
Exercise 6:
How to Edit an effect block
In this exercise we will edit an effect block.
- Press the Effects key (if you are not already there).
- Select the Edit page by using the < > Arrow keys.
- Double click the Mute key of the block you want to edit
(located on the front panel).
You will now enter the Edit, Parameters display.
Use the Parameter wheel to change the cursor position and the
Value wheel to change values.
In case the Preset contains more than one of the blocks you want
to edit, a second double click on the block Mute key will take
you into number two.
Exercise 6:
How to Edit an effect block
Press the Effects key
Use the Arrow keys
to select the Edit
display
Dial Parameter
wheel to move
the cursor
Dial Value
wheel to
change values
Double click the Mute
key of the block you
want to edit
Press Exit to exit to
the Edit page
ENTER
DELAY
EXIT