TC Electronic SCF Stereo Chorus Flanger - Manual (Page 4)

6
Pitch Modulation:
A combination of chorus and pitch - vibrato which creates a
"light" chorus sound.
Real Stereo
When using stereo the effect signals and the clean signal
appear simultaneously in both sides. The effect signals are
alternating phase reversed in left and right sides, creating a
unique spatial dimension.
Excellent dynamic range
The 100dB signal to noise ratio means that there is very little
background noise generated by the electronics. This high
signal to noise ratio is very unusual for pedal effects, and
makes this device appropriate for any kind of recording.
Preamp + Line Driver
The TC SCF can be used with almost any instrument/amplifi-
cation. Its built-in preamplifier can handle even the weakest
signals e.g. from some keyboards, mixers and transducer
pickup. High signal output allows long cable runs with full signal.
INTRODUCTION
7
Frequency response 20-20.000Hz
The wide frequency response is one of the reasons why the
SCF pedal sound much better than any other effect pedals of
this type.
Linear frequency response
The linear frequence response of the TC Stereo Chorus/Flanger
ensures that the sound stays transparent and clear, and that
there will be full effect from the deepest bass note to the
highest harmonics. Rather than cutting off the precious
harmonics of your signal, the harmonics are processed when
the pedal is activated, and allowed to pass completely
unaffected when it is bypassed
DYNAMIC RANGE: 100dB
A dynamic range of 100dB means that the SCF is extremely
silent as well as being capable of handling the dynamics of
your signal. - No hiss but all the "punch" you need. With no
noise added, your music will keep its transparency and
brightness so soft passages are clear and rich in harmonics.
SCF SOUND QUALITY