TC Electronic BH500 - Manual (Page 7)

EN
If you just can’t wait…
Here are a few quick steps to get you playing within minutes.
Unpacking
• Unpack your BH500 head.
• The box should contain the following items:
– BH500 Head (230V or 115V version)
– Power Cable
– RCA to mini jack cable
– Manual
• Inspect all items for signs of transit damage. In the unlikely
event of this having occurred, inform the carrier and supplier.
• Keep all the packaging if damage has occurred, as this will
show evidence of excessive handling force.
• It is also a good idea to keep the packaging for future
transportation.
Setting up
• Connect the Speaker output to a cabinet
• Connect the power cable to an outlet with correct voltage
according to the label on the amps rear panel
• Connect your bass to the input jack on the front panel
• Adjust the input gain using the GAIN knob
• Adjust the output volume using the MASTER knob
• Play!
Be sure to check www.tcelectronic.com for latest news about
BH500 and other TC products.
QuIck Setup GuIde
5