TC Electronic Alter Ego Delay - Manual (Page 7)

Setup
Alter Ego Delay English Manual Version 2.1 5
Setup
Ready…
The Alter Ego Delay box should contain the fol-
lowing items:
– 1 Alter Ego Delay pedal
– 2 rubber feet for “non-velcro” pedalboard
mounting
– 1 TC Electronic sticker
– 1 leaflet about TC’s guitar FX product range.
– 1 USB cable for transferring TonePrints from
the computer to the pedal and updating the
pedal firmware
Inspect all items for signs of transit damage. In
the unlikely event of transit damage, inform the
carrier and supplier.
If damage has occurred, keep all packaging as it
can be used as evidence of excessive handling
force.
Set…
– Connect a 9V power supply with the follow-
ing symbol to the DC input socket of Alter Ego
Delay.
! Please note that Alter Ego Delay does not
come with a power supply.
– Plug the power supply into a power outlet.
– Connect your instrument to the MONO IN jack
on the right side of the pedal using a ¼“ jack
cable. You can also feed the pedal with a ste-
reo signal by using both IN jacks.
– Connect the MONO OUT jack on the left side
of the pedal to your amplifier using a ¼“ jack
cable.
Play!