TC Electronic M3000 - Manual (Page 49)

47
Delay
The Delay presets are capable of performing up to 1350ms
delay. The Feedback filters make it possible to control both
high and low frequency feedback.
Delay time
Controls the length of delay time.
Feedback
Controls the amount of effect signal routed back to the Input.
Hi Cut Freq
Feedback Hi Cut-off frequency. Signal is damped 6dB/oct
above this frequency.
Hi Cut Level
Sets maximum depth of cut above the Hi Cut shelving
frequency.
Hi Cut Freq (Feedback filter)
Hicut shelving type filter (-6dB/oct) at the feedback loop.
Lo Cut Freq (Feedback filter)
Locut shelving type filter (-6dB/oct) at the feedback loop.
Mix
Mix between direct signal and effect.
Out Level
Adjusts Output level. Use this parameter to match levels
between presets.
Pitch
The Pitch presets are capable of performing 6 pitched Voices
at the same time. This makes it possible to produce
a true Chorus effect.
Voice
Sets which voice you are editing.
Pitch
Sets the pitch of the current Voice (0-1200).
Level
Sets the level of the current Voice.
Pan
Sets the panning of the current Voice.
Delay
Sets the delay of the current Voice.
Mix
Mix between direct signal and effect.
Out Level
Adjusts Output level. Use this parameter to match levels
between presets.
ADDITIONAL EFFECTS - DELAY & PITCH