Cobalt Digital COMPASS 9241 Analog Audio Distribution Amplifier - Manual (Page 6)

6
Introduction
This chapter contains the following sections:
•
Overview
•
Functional Block Diagram
•
Features
• Documentation Terms
Overview
The 9241 is an analog audio distribution amplifier designed for broadcast use. It can be used
as either a mono or two channel (stereo) audio DA. When used as a mono DA it can provide
eight copies of the single (mono) input signal or four copies each of the two (stereo) inputs.
The 9241 is housed in the openGear 8310-series (10-slot) or 8321-series (20-slot) frame. If
the frame has an optional network controller card installed, the 9241 can be monitored and
controlled using the Dashboard remote control software.
Functional Block Diagram
Figure 1. Simplified Block Diagram of the 9241 Functions