Cobalt Digital COMPASS 9241 Analog Audio Distribution Amplifier - Manual (Page 14)

14
REMOTE CONTROL
DashBoard Control
This card may be monitored or controlled by a remote computer through DashBoard the free
configuration monitoring software available to openGear users.
With DashBoard installed on your computer the following menus are available when
interrogating an 9241 card:
MENU ITEM DISPLAY DESCRIPTION
Product 9241 Product identification code
Name Analog Audio Distribution Amplifier Product functional description
Supplier Cobalt Digital Inc. Manufacturer of the card
Software Rev. ## Two digit software revision code
Card Info
(Read
Only)
Web site www.cobaltdigital.com Manufacturer’s web address
MENU ITEM DISPLAY DESCRIPTION
Green Dot - OK Card is functioning properly and
appropriate signals are connected Card
Status
Red Dot - Silence Detected (CH1,
CH2 or both) Audio signal is not present
Audio detected Audio signal is present Input CH1
Silence detected Audio signal is not present
Audio detected Audio signal is present
Card
Status
(Read
Only)
Input CH2
Silence detected Audio signal is not present
MENU ITEM DROP DOWN SELECTION DESCRIPTION
Stereo DA (Dual 1 x 4) Functions as a stereo DA
Signals must be connected to both
inputs
Mono Mix ((CH1 + CH2)/2) Functions as a summing DA
Signals must be connected to both
inputs
Card
Settings
(Drop down
selection)
Mode
Mono DA (CH1 –> 1 x 8) Functions as a mono DA
Input signal connected to CH1