9082 function submenu list and descriptions – Cobalt Digital COMPASS 9082 HD_SD Frame Sync User Manual
Page 42

3
9082 Function Submenu List and Descriptions
3-16
9082 PRODUCT MANUAL
9082-OM (V4.4)
(continued)
• Timecode Source Status Displays
Displays the current status and contents of the three supported timecode
formats shown to the left.
• If a format is receiving timecode data, the current content (timecode
running count and line number) is displayed.
• If a format is not receiving timecode data, Unlocked is displayed.
• Source Priority
As described here, selects the priority assigned to each of the four
supported formats in the event the preferred source is unavailable.
Each of the four Source Priority selection lists allows assignment of
source priority from the following choices:
Source Priority 1 thru Source Priority 4 select the preferred format to be
used in descending order (i.e., Source Priority 2 selects the second-most
preferred format, and so on.
• Output Status Display
Displays the current content and source being used for the timecode data
as follows:
• Output status OK (in this example, SDI VITC timecode received and
outputted).
• Timecode Insertion button set to Disabled; output insertion disabled.
Note: • If timecode is not available from Source Priority selections
performed, timecode on output reverts to Free Run (internal
count) mode.
• Because the 1’s digit of the display Frames counter goes from 0 to
29, the fractional digit (along with the 1’s digit) indicates frame
count as follows:
0.0
Frame 0
0.1
Frame 1
1.0
Frame 2
1.1
Frame 3
•
•
•
29.1 Frame 59
Table 3-2
9082 Function Submenu List — continued