Cobalt Digital COMPASS 9011 Standard Definition D_A 10-bit SDI to Analog Composite, Y_C and Component - Manual (Page 17)

9011 Owner’s Manual •••• (V 1.1) Page 17 of 22
Technical Specifications
Table 4. Card - Technical Specifications
Category Parameter Specification
Data Rates Supported SMPTE 259M-C SD-SDI: 270 Mbps
Frame Rates Supported 486i 29.97 NTSC, 575i 25 PAL
Impedance 75
Ω terminating
Equalization 1000ft (300 meters) Belden 1694A
Serial Digital
Video Input
Return Loss >18dB at 5MHz – 270MHz
Number of Outputs 4
Video Outputs Composite, Component YPbPr (BetaCam™, MII™,
SMPTE/N10), RGB, and Y/C
Conversion Bit Depth 10-Bits
Frequency Response 4x Y: 0-5.5 MHz +/- 0.15 dB
4x PbPr: 0-2.2 MHz +/-0.25 dB
Differential Phase < ±0.5° typical
Differential Gain < ±0.5% typical
S/N > 75 dB
Conversion Time < 2 us
K-Factor 2T < 0.6%
SCH Phase < 0.8%
Analog Video
Output
Return Loss > 35dB to 5 MHz
Number of Inputs 1 Terminating Frame Reference Inputs
1 Terminating Reference on BNC 2
Standards Supported 486i 29.97 NTSC, 575i 25 PAL
Signal Level 1Vp-p nominal
Signal Analog video sync (black burst or tri-level)
Impedance 75Ω
Return Loss > 30dB to 30MHz
Reference
Video Input
Max DC on Ref Input ±1V
Total Power Consumption < 7W
Other
Warranty Five Year Transferable
Specifications are subject to change without notice.