Sicherheitsdatenblatt – SCT-Germany BELT TENSIONER User Manual
Page 4

SICHERHEITSDATENBLATT
Blatt
4/5
Druckdatum 03.06.2007
Überarbeitet am
16.05.2007
Appearance:
Physical state Aerosol
Colour Colourless
Melting point/range
Not applicable
Boiling point/range
40- 90 ºc
Relative density
0.73
PH
Not applicable
Solubility in water
Insolubility
Flash point
Not applicable
Viscosity
Not applicable
Section 10. Stability and Reactivity
Conditions to be
avoided
Pressurized container: protect from sunlight and do not
expose to temperatures exceeding 50ºc.
Keep away from heat and sources of ignition
Materials to be
avoided
Strong oxidizing agent
Section 11. Toxicological information
Inhalation
Excessive inhalation of solvent vapours may give rise to
nausea, headaches and dizziness.
Ingestion
Ingestion is unlikely to occur after vomiting of swallowed
product aspiration into lunge is likely. Solvents may induce
chemical pneumonia.
Skin contact
Irritating to skin (R38)
Section 12. Ecological information
Other adverse
effects
R51/53: Toxic to aquatic organisms, may cause long-term
adverse effects in the aquatic environment.
Do not allow to enter public sewers and watercourses.
Section 13. Waste Disposal
Do not empty into drains.
This material and its container must be disposed of in a safe
way.
Product
Disposal should be in accordance with local, state or national
legislation.
Section 14. Transport
UN-number
1950
Road/Rail - ADR/RID UN 1950 Aerosols Class: 2, PG: NA, Class code: 5F, Label:
2.1
Sea-IMDG
UN1950 Aerosols, Limited Quantities Class: 2, PG: NA.