Rosen Ultimate Clean - Manual (Page 3)

Cleaning tools with spider nose
tool types
disc tool with gauge and bend plate
tool Body
grit-blasted carbon steel, coated with primer and epoxy.
Flanges chamfered to avoid sharp edges, designed to
withstand extreme differential pressures.
gUidiNg disCs
(standard version: 2 discs, long-run version: 4 discs)
Made of Roplasthan® 1200, hardness 85 shore a
BUmper Nose
one plastic bumper mounted to the front in order to
protect the tool against impact; Bidi operation possible.
sealiNg disCs
(standard and long-run version: 4 discs)
Made of Roplasthan® 1100, hardness 65 shore a
CUps
(standard version: 2 cups, long-run version: 4 cups)
Made of Roplasthan® 1200, hardness 85 shore a
NUts & Bolts
Metric bolting grade 8.8, zinc-plated. Metallic self-locking
nuts according to din 980 V.
• Basic (standard or long-run tools)
• gauging tool (with gauge and/or bend plate)
• Brush tool (with spring-supported or grinding brushes)
• Magnet tool (with standard or high-performance
magnets)
• combinations of the above
Cup/disc tool with spring supported brushes
tool location transmitters (it X 251, it X 503,
it X 504, it X 804 and it X 806) pipeline data logger
3