Grain Systems Tanks PNEG-1736 - Manual (Page 2)

Page 2 of 3 PNEG-1736
Large GSI Logo Field Assembly and Installation Instructions
For 2 Post 40-Series Bins
1. Place center brackets on a stiffener.
2. Drill holes in the sidewall for the additional brackets. Use sign to locate drill holes. Holes should be
approximately 37" from center stiffener.
3. Place additional brackets on the drilled holes of the sidewall. (See Figure 2.)
Figure 2 2 Post Sign Stiffener
Ref # Part # Description
A Varies Sidewall Sheet
B Varies Stiffener
C MIS-7012 Large Decal Assembly