beautypg.com

Assembly instructions, Platform support installation – Grain Systems Bin Accessories PNEG-1846 User Manual

Page 19

background image

4. 105' Diameter Exhaust Walk Around Package

PNEG-1846 “X” Series Complete 105' Walk Around Manual

19

Assembly Instructions

1. The exhaust walk around package has been structured with the correct components for installation

in the upper roof assembly of a 105' diameter tank. Be sure and follow the complete instruction
sheets for correct placement of parts. Failure to do so may result in improper fit of parts or shortage
of parts.

(See Figure 4B.)

Figure 4B

Platform Support Installation

1. To begin the exhaust walk around installation, attach one platform support (LDR-4426) to each roof rib

in the upper roof assembly. The platform supports should be installed in the 1

st

and 2

nd

holes from the

bottom of the roof rib using 5/16" x 1-1/4" bolts supplied in the roof hardware package.

(See Figure 4C.)

Figure 4C