Grain Systems Bin Flooring PNEG-222 - Manual (Page 12)

2. Recommended Method for Full Floor Installation
12 PNEG-222 48' Cor-Lok and Cut-Lok Flooring
Installation Instructions
1. When a splice is needed, plank length A as described in the floor manual should be installed
alongside plank length B.
2. The under-splice should then be installed under the split of plank A and B. The splice should extend
3" under each plank. The splice should be screwed in place as shown in Figure 2E on Page 11 .
3. This process will be repeated for all plank locations requiring a splice.
Figure 2F