Grain Systems Unload Augers PNEG-1060 User Manual
Page 7
2. Safety
PNEG-1060 6", 8" and 10" Variable Angle Auger Connector
7
Emergency Shut Down Sequence
A. In an emergency, shut down the power source.
Pinch Points
A. Components of this equipment have sharp edges which can scrape and/or cut an operator.
B. A moving auger can sever an operator’s limbs or even kill him/her.
Shields and Guards
A. ALWAYS keep ALL shields and guards in place during operation.
GSI will replace decals free of charge.
Wear Protective Clothing
Wear close fitting clothing and safety equipment appropriate
to the job.
Remove all jewelry.
Long hair should be tied up and back.
Safety glasses should be worn at all times to protect eyes
from debris.
Wear gloves to protect your hands from sharp edges on
plastic or steel parts.
Wear steel toe boots to help protect your feet from falling
debris. Tuck in any loose or dangling shoe strings.
A respirator may be needed to prevent breathing potentially
toxic fumes and dust.
Wear hard hat to help protect your head.
Eye Protection
Gloves
Steel Toe Boots
Respirator
Hard Hat
A Pinch Point is a narrow area between two surfaces that is likely to trap or catch
objects and so is a potential safety hazard.