Grain Systems Unload Augers PNEG-1060 - Manual (Page 4)

4 PNEG-1060 6", 8" and 10" Variable Angle Auger Connector
1. Introduction
General Information
1. GSI reserves the right to improve its product whenever possible and practical to do so. We reserve
the right to change, improve, and modify products at any time without obligation to make changes,
improvements, and modifications on equipment sold previously.
2. Receiving merchandise and filing claims
a. When receiving merchandise, check both the quantity of parts and their descriptions against
the packing list enclosed within each package. All claims for freight damage or shortage must
be made by the consignee within ten (10) days from the date of the occurrence of freight
damage. The consignee should accept the shipment after noting the damage or loss on the Bill
of Lading (BOL).
3. The variable angle auger connectors have been designed and manufactured to provide years of
dependable service. The care and maintenance of this machine will affect the service and
satisfaction obtained. Observing the instructions and suggestions in this manual contributes to the
satisfactory service provided by this equipment. If additional information or assistance should be
required, please contact the factory or your local dealer.
Capacity
1. The capacities may vary greatly under different conditions. The following factors play a role in the
performance of the auger:
* For example, a twenty-five percent (25%) moisture could cut capacity by as much as forty
percent (40%) under some conditions.
• Speed
• Angle of operation
• Moisture content*
• Amounts of foreign matter
• Different materials
• Methods of feeding