Grain Systems Unload Augers PNEG-1443 - Manual (Page 2)

Page 2 of 4 PNEG-1443
8" and 10" Rack and Pinion
Figure 2
5. With rack and pinion fully extended, attach lower half band and secure to unload tube with six (6)
5/16" x 1-1/2" bolts, washers and serrated flange nuts, three (3) on each side. (See Figure 3.)
6. To open all gates, with center gate closed, place second 5/16" x 1-3/4" bolt through center gate control
rod and intermediate gate control rod and secure with nut. (See Figure 3.)
Figure 3