beautypg.com

Platform and safety cage package – Grain Systems Bin Accessories PNEG-1773 User Manual

Page 68

background image

4. Assembly Instructions

68

PNEG-1773 42'-135' “X” Series Ladder, Cage and Platform

Platform and Safety Cage Package

5. Attach the ladder flare to the ladder using 5/16" hardware. You must drill the bottom hole through the

ladder and use 5/16" hardware.

(See Figure 4AV.)

Attach the narrow safety cage bracket, cage hoops and cage splice brackets to the ladder flares and
platform posts. This must all be assembled at the same time using 5/16" hardware.

NOTE: Be sure the ladder flares are vertical and parallel to the platform posts by adjusting the

splice brackets. The ladder should be square to the platform.

Figure 4AV