beautypg.com

Flashing support at stiffeners, Chapter 10 flashing support at stiffeners – Grain Systems Bin Flooring PNEG-223 User Manual

Page 29

background image

PNEG-223 60' Cor-Lok and Cut-Lok Flooring

29

10. Flashing Support at Stiffeners

Stiffener Flashing Support Instructions for Internal
Universal Stiffeners

1. Install the floor and support system, cutting the floor to go around the internal stiffeners as required.

2. Break the stiffener flashing support (SS-6984) into its three (3) components.

3. Lay the flashing supports on top of the flooring and weld the flashing supports to the stiffener as close

as possible. Fasten the flashing to the wall, flashing support and floor. Seal all spaces by welding
or caulking.

4. Paint all welds with good quality zinc rich paint.

5. Stiffener flashing supports (SS-6984) must be ordered separately from the standard floor

and flashing.

Figure 10A

See also other documents in the category Grain Systems Equipment: