Grain Systems Unload Augers PNEG-790 - Manual (Page 12)

12 Pneg - 790 Commercial Bin Well Control Rod Kits & Rack & Pinion Controls
2. ASSEMBLY
Commercial Bin Control Rod Kits.
Commercial Bin Control Rod Kit is used for opening and closing the
bin well control gates from outside the bin.
The optional Rack & Pinion Control can be used to make the job easier. Contact
your distributor for more information.
The Commercial Bin Control Rod Kit can be used on 24' - 75' (7.32 m - 22.86 m)
diameter bins.
The Commercial Bin Control Rod Kit comes with three (3) control rods to be used
with a minimum of two (2) Intermediate Bin Wells and the Center Bin Well.
Two (2) or more rod sections are used for larger diameter bins. The rod sections
are connected with an Internal Threaded Coupler.
1. Use the following illustration Figure 2B and the chart on Page 13 to determine the
necessary pipe lengths.
Figure 2B
Center Well
C . Center Bin Well Control Rod
A. Outer Intermediate
Bin Well Control Rod
Bin Wall
Rack & Pinion
Control
B . Inner Intermediate Bin
Well Control Rod
D