Danze DC017118 - Installation Manual - Manual (Page 3)

3 4
4. Set the lavatory (A) into the proper position
on top of the Orrington
® bathroom vanity. Ad-
just the lavatory position to assure that there is
an even amount of wood showing around the
base of the lavatory (A).
5. Press down firmly on the lavatory rim to
distribute the adhesive.
6. Remove excess adhesive with a dry cloth.
7. Dampen a cloth with rubbing alcohol and
clean any unwanted adhesive caulk from the
lavatory surface as soon as lavatory (A) has been
placed.
8. Complete the faucet and drain connections
per the manufacturer’s recommendations.
For installation on other bathroom vanities
1. Use a level to assure that the slab or counter
top is perfectly flat in length and width.
InstallatIon InstructIons
For installation on the Orrington ® bathroom vanity
1. Install the Orrington ® bathroom vanity
according to the Installation Instructions
provided with the bathroom vanity.
2. Assemble faucet and drain (not included) in
lavatory (A) according to the manufacturer’s rec-
ommendations.
3. Apply a continuous bead of adhesive caulk
(not included) in the groove on the top surface
of the Orrington
® bathroom vanity to assure a
water tight seal between the lavatory (A) and
vanity.
Product dImensIons
BEIFTJWF!DBVML
4”
8”
3 1/4” 2 7/8”
8 1/8”
17 3/8”
16 3/4”
23 3/4”
7 1/8”
2 7/8”
7 1/8”
12 3/4”
8”
11 1/4”
3/8” HOT
1 1/4” WASTE
3/8” COLD
FINISHED FLOOR