Danze D130001B - Installation Manual - Manual (Page 3)

The Danze 1/2” shower diverter valve extension kit is designed to provide up to 1 1/4” of
additional wall depth adjustment.
A) If the distance from the back of mounting plate to the finished wall surface is between 3 11/16~4
3/16", you need to use the extension kit A.
B) If the distance from the back of mounting plate to the finished wall surface is between 4 3/16~4
9/16", you need to use the extension kit B.
1. Remove the bonnet nut from the diverter cartridge by using an
adjustable wrench. Extract cartridge out of the socket of valve
body.
3