Banks Power DynaFact Dash Pod '03-05 Dodge 5.9L Cummins Truck User Manual
Page 5
96516 v.1.0
5
bracket to both outer gauges and
fasten with spin nuts. See
Figure 4.
7.
Complete the wiring of the gauges
per the instructions supplied with the
gauges.
8.
Refit the dash panel by carefully
snapping it back into place. Be careful
not to pinch any wires when installing
the dash panel.
9.
Your dash pod is now installed and
is ready for use. See
Figure 5.
Warning: This product is to be used
only on vehicles that do not have
factory switches such as seat
warmers, four-wheel drive switch
or any other switch installed where
the factory storage tray is located.
Figure 4