Banks Power Ford Trucks: (Diesel ’08 - 10 6.4L Power Stroke) Intake- Ram-Air Intake System '08-10 F-250_ F-350_ F-450 - Manual (Page 4)

4
96496 v.6.0
Dear Customer,
If you have any questions
concerning the installation of
your Banks Ram-Air System,
please call our Technical Service
Hotline at (888) 839-2700
between 7:00 am and 5:00 pm
(PT). If you have any questions
relating to shipping or billing,
please contact our Customer
Service Department at
(888) 839-5600.
Thank you.
1.
For ease of installation of your
Banks Ram-air intake system,
familiarize yourself with the procedure
by reading the entire manual before
starting work. This manual contains
12 pages of copy, illustrations and
parts listing. If any pages are missing
from this manual please call Gale
Banks Engineering immediately for a
replacement.
2.
The view of the Ram-Air assembly
(page 3) provides only general
guidance. Refer to each step and
section diagram in this manual for
proper instruction.
3.
Throughout this manual, the
left side of the vehicle refers to the
driver’s side, and the right-side to the
passenger’s side.
4.
Route and tie wires and hoses
a minimum of 6 inches away from
exhaust heat, moving parts and sharp
edges. clearance of 8 inches or more
is recommended where possible.
5.
During installation, keep the
work area clean. If foreign debris
is transferred to any Banks system
component, clean it thoroughly before
installing.
Notification
The Banks Ram-Air Filter comes
pre-oiled and no oiling is necessary
for initial installation. Service the
filter as specified in the Filter
Maintenance Section of this
manual.
Tools Required:
• Standard and #3 Phillips head
screwdrivers
• Clean shop towels or rags
•
1 ⁄
4
” and 5 ⁄
16
” nut drivers
General Installation Practices
Table of Contents
Section 1 . . . . . . . . . . . . . . . . . . . . . . 3
General Assembly
Section 2 . . . . . . . . . . . . . . . . . . . . . . 4
Ram-Air Installation
Section 3 . . . . . . . . . . . . . . . . . . . . . 12
Filter Maintenance