Velleman CTC1000SO - Manual (Page 8)

CTC1000SO
V. 01 – 12/06/2013 8 ©Velleman nv
 Water: siren will be on for 0.5s & off 0.5s continuously.
Alarm modes: LED and beep behaviour
In order to easily recognize various statuses, the bell box uses the following methods to indicate while
you are in arm and disarm modes.
For the sounds folllowed by *, the beep confirmation depends on the Confirmation ON / OFF settings you
are using. When Confirmation is set to OFF, the device will not beep.
alarm mode
Sound LED
arm 1 beep * 3 LEDs flash together
disarm 2 beeps * LEDs flash sequentially for 1 cycle
arm (low battery) 5 beeps 3 LEDs flash three times
disarm (low battery) 5 beeps LEDs flash sequentially for 2 cycle
arm (tamper) 5 beeps 3 LEDs flash three times
disarm (tamper) 2 beeps * 3 LEDs flash twice
11. Technical Specifications
power supply 4 x alkaline 1.5 V type D batteries (not incl.) (LR20)
sound level 104 dB @ 1 m
frequency 868.6375 MHz
range > 200 m in open space (ideal circumstances)
operating temperature -20 to 50 °C
humidity up to 95 % non-condensing
dimensions 257 x 220 x 69 mm
weight 787 g
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our
website www.velleman.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.