Velleman CAMCOLD24 - Manual (Page 13)

CAMCOLD24 - CAMCOLD24W
V. 02 – 30/05/2013 13 ©Velleman nv
7.11 Camera ID
Use this function to give the camera a name. The name will appear
on the monitor. You can define where the name appears on the
screen.
Display: CAMERA ID
OFF No name for the camera.
ON You can enter two lines of 26 characters for the camera name.
Note: make sure that CHR1 is selected.
 Position the cursor in the text line by selecting the arrow
icons  on the OSD screen.
 Use the navigation buttons on the joystick to select the
characters for the name. Press the middle button to confirm
and move to the next character.
 Select CLR to delete a character.
 Select POS to position the name on the monitor. Use the
navigation buttons on the joystick to move the text to the
desired position, and press the middle button to confirm.
7.12 Sync
Synchronisation setting for the camera. You cannot adjust this
setting. Synchronisation is always internal.
7.13 Language
Use this function to set the language of the OSD menu.
7.14 Camera reset
Use this function to reset all the settings of the camera.
8. Technical Specifications
IP rating
IP55
pick-up element 1/3" HR Sony colour CCD image sensor
number of pixels 976 (H) x 582 (V) - PAL -
resolution 700 TV lines
DSP Sony Effio
min. illumination 0.001 lux / F2.0
IR LEDs 36
max. IR projection distance 30 m
S/N ratio
> 48 dB (AGC off)