Velleman MON9TA2 - Manual (Page 5)

MON9TA2
V. 01 – 06/06/2013 5 ©Velleman nv
Menu Options
Color  brightness
 contrast
 saturation
Function  reset
 display ratio
 ir on/off
OSD (on screen display)  horizontal position
 vertical position
 timeout
 transparency
Sound  volume setting
8. Replacing the batteries of the remote control
1. Slide the battery slot open.
2. Remove the battery.
3. Insert a new battery (always use the correct battery type: see Technical specifications). Make sure
the polarity is correct.
4. Close the battery slot.
WARNING
 Do not puncture or throw batteries in fire as they might explode.
 Dispose of batteries in accordance with local regulations.
 Keep batteries away from children.
9. Cleaning and maintenance
 Make sure the monitor is off before performing any maintenance activities.
 Use a soft damp cloth to clean the monitor.
 Do not apply excessive pressure on the display.
 Do not use abrasive solutions or solvents.
10. Technical Specifications
display mode TFT Active Matrix (16:9/4:3)
screen size 9"
resolution 800 (H) x 480 (V)
number of pixels 384 000
video input signal 1.0 Vpp / 75 Ω (composite video signal)
OSD function horizontal/vertical image reversing, setting adjustment and volume
input resolution HDMI: under 1080P
VGA: 800 x 600 pixels or 1024 x 768 pixels
power supply monitor: max. 12 VDC ± 10%
power consumption: max. 5 W
remote control: 1 x 1.5 V CR2025 battery (incl.)
optional power supply: PSSMV18 (plug 4 x Ø 1.7 mm)
dimensions 219 x 142 x 28 mm
weight 450 g
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device.