Velleman LPTJUNIOR - Manual

LPTJUNIOR 1 VELLEMAN
LPTJUNIOR – 6-CHANNEL DMX DIMMING CONSOLE
1. Introduction & Features
Thank you for buying the LPTJUNIOR! Please read the manual carefully before bringing this device into service. This
small and light, yet powerful and versatile device can control 512 channels, save 46 scene settings (a combination of
channel settings) - 6 of which under 'hot keys', features a built-in battery with a 3-hour autonomy and can work
simultaneously with another console.
Should this device be damaged during transportation, don't install it and consult your dealer.
2. Safety Instructions
Be very careful during the installation: touching live wires can cause life-threatening electroshocks.
Do not touch the device during operation as the housing heats up.
Keep this device away from rain and moisture.
Unplug the mains lead before opening the housing.
• A qualified technician should install and service this device.
• Damage caused by disregarding certain guidelines in this manual is not covered by the warranty and the dealer
will not accept responsibility for the ensuing defects or problems.
• Do not switch the device on immediately if it has been exposed to changes in temperature. Protect the device
against damage by leaving it switched off until it has reached room temperature.
• This device falls under protection class I. It is essential, therefore, that the device be earthed. A qualified person
must carry out the electric connection.
• Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.
• Do not crimp the power cord and protect it against damage. Ask an authorised dealer to replace it if necessary.
• Always disconnect the device from the mains when it is not in use or when you wish to clean it. Only handle the
power cord by the plug. Never pull out the plug by tugging the power cord.
• Note that damage caused by user modifications to the device is not covered by the warranty. Keep the device
away from children and unauthorised users.
3. General Guidelines
• This device is a lighting controller for professional use on stages, in discos, theatres, etc. This fixture can only be
operated with an alternating current of max. 230Vac/50Hz and was designed for indoor use only.
• Do not shake the device. Avoid brute force when installing or operating the device.
• Make sure to install the device where it is not exposed to extreme temperatures (<5 or >35°C), moisture or dust.
• Familiarise yourself with the functions of the device before actually using it. Do not permit operation by unqualified
persons. Most damages are the result of unprofessional operation.
• Please use the original packaging if the device is to be transported.
• For safety reasons, please be aware that all modifications on the device are forbidden.
• Do not remove the serial number sticker from the device as doing so will void the warranty.
• Only use the device for its intended purpose. All other uses may lead to short-circuits, burns, electroshocks, lamp
explosion, crash, etc. Using the device in an unauthorised way will void the warranty.