Velleman PEM10D2 - Manual (Page 8)

PEM10D 2
V. 02 – 27/11/2013 8 ©Velleman nv
8. Cleaning and Maintenance
•
Make sure the cover and reflector are clean at all times.
• Remove dirt with a soft lightly moist lint-free cloth.
9. Technical Spe cifications
cover
PMMA (polymethyl methacrylate)
housing ABS (acrylonitrile butadiene styrene)
IP-rating 44
input voltage 12 - 250V AC or DC
transmitter infrared LED, wavelength 750 nm
range up to 10 m
beam spreading angle 1.5°
contact capacity 0.5 A / 120 Vac (1A/30 Vdc)
response time 10 ms
delay time of relay 100 ms
operating temperature -25 to +60°C
storage temperature -35 to +80°C
dimensions transmitter: 122 (H) x 60 (W) x 62 (T)
reflector: Ø 80 x 7 mm
weight ± 200 g
Use this device with original accessories only. Velleman nv
cannot be held responsible in the event of damage or injury
result ing from (incorre ct) use of this dev ice. For more info
concerning this product and the latest version of this manual,
please v isit our we bsite www.velleman.eu. The information in
this manual is subject to change without prior notice.
© COPYRIGHT NO TICE
The copyright to this manual is owned by Ve lleman nv. All
worldwide rights reserved. No part of this manual may be copied,
reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.