Features, Contents and assembly, Replacing the lamp – Velleman VTLAMP2BN User Manual
Page 3: Technical specifications

VTLAMP2BN / VTLAMP2WN / VTLAMP2WN3 / VTLAMP2WN8
V. 02 – 27/12/2012
3
©Velleman nv
•
Familiarise yourself with the functions of the device before actually using it.
•
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to
the device is not covered by the warranty.
•
Only use the device for its intended purpose. Using the device in an unauthorised way will void the
warranty.
•
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the
dealer will not accept responsibility for any ensuing defects or problems.
4.
Features
•
optional
o
stand with wheels: VTLAMPST
o
table stand: VTLAMPST1.
5.
Contents and Assembly
Refer to the illustration on page 2 of this manual.
1. Take the lamp and the clamp out of the packaging.
2. Secure the clamp [1] tightly to a solid surface capable of carrying it.
3. Remove the screw [2] from the clamp [1].
4. Insert the stem [3] into the clamp [1] and secure it by fastening the screw [2].
5. Insert the power plug [4] into a power outlet.
6. Switch the lamp on by means of the switch [5].
6.
Replacing the lamp
1. Unplug the device and let the circular fluorescent lamp cool down before replacing it.
2. The lamp [6] is located behind a plastic diffuser [7] and is held in place by three metal clamps.
Remove all screws that hold the plastic diffuser in place and gently remove the diffuser.
3. Carefully take the defective lamp from the clamps and remove it.
4. Install a new lamp (order code LAMP22) by connecting it and securing it in the metal clamps.
5. Put the diffuser back and fasten its screws.
Caution: If the plastic diffuser is damaged, disconnect the lamp immediately from the mains. The diffuser is
not replaceable. Do not use the lamp with a cracked or broken diffuser.
7.
Technical Specifications
VTLAMP2BN VTLAMP2WN VTLAMP2WN3 VTLAMP2WN8
dioptre
5 5 3 8
dimensions
arm length
105 cm
width
24
cm
height
6
cm
glass
Ø 120 mm
colour black
white
white
white
power supply
230 Vac / 50 Hz
spare lamp
order code LAMP22 (22 W)
spare magnifying glass cover
order code
VTLAMP2BN/SP1
(black)
order code
VTLAMP2WN/SP1
(white)
order code
VTLAMP2WN/SP1
(white)
order code
VTLAMP2WN/SP1
(white)
ideal ambient temperature
0°C – 35°C
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device. For more info concerning this
product and the latest version of this manual, please visit our website www.velleman.eu. The
information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE – The copyright to this manual is owned by Velleman nv. All worldwide rights
reserved. No part of this manual may be copied, reproduced, translated or reduced to any electronic medium
or otherwise without the prior written consent of the copyright holder.