Velleman VDLLUF - Manual (Page 3)

VDLLUF
V. 01 – 20/09/2013 3 ©Velleman nv
Make sure that the available voltage does not exceed the voltage
stated in the specifications of this manual.
Do not crimp the power cord and protect it against damage. Have
an authorised dealer replace it if necessary.
Install the device at a minimal distance of 0.5 m from flammable
and explosive objects or substances.
Respect a minimum distance of 0.5 m between the device’s light
output and any illuminated surface.
3. General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last
pages of this manual.
Keep this device away from dust and extreme temperatures.
Protect this device from shocks and abuse. Avoid brute force when
operating the device.
Familiarise yourself with the functions of the device before actually
using it.
All modifications of the device are forbidden for safety reasons.
Damage caused by user modifications to the device is not covered
by the warranty.
Only use the device for its intended purpose. Using the device in
an unauthorised way will void the warranty.
Damage caused by disregard of certain guidelines in this manual
is not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.
Mechanical wear and LEDs are not covered by warranty.
Lighting effects are not designed for permanent operation: regular
operation breaks will prolong their lives.
Use the original packaging if the device is to be transported.
Keep this manual for future reference.
4. Operation
1. Choose a suitable mounting spot on a wall and hang the device
from two screws (not included).
Warning: Make sure that the device and power cord are out of
reach, so that the device cannot be pulled off the wall
(accidentally).
2. Plug the power cord into a suitable mains socket.
The light show starts automatically. The light show is sound-