Milton CAT D8T - Manual (Page 16)

16 D8T Track-Type Tractor specifications
Undercarriage
Shoe Type Moderate Service
Width of Shoe 560 mm 22 in
Shoes/Side 44
Grouser Height 78 mm 3 in
Pitch 216 mm 8.5 in
Ground Clearance 618 mm 24.3 in
Track Gauge 2082 mm 82 in
Length of Track on Ground 3207 mm 10.5 ft
Ground Contact Area 3.58 m 2 5,554 in 2
Track Rollers/Side 8
Number of Carrier Rollers 1 per side (optional)
• Positive Pin Retention Track.
Hydraulic Controls
Pump Type Piston-type, Variable
displacement
Pump Output (Steering) 276 L/min 73 gal/min
Pump Output (Implement) 226 L/min 60 gal/min
Tilt Cylinder Rod End Flow 130 L/min 34 gal/min
Tilt Cylinder Head End Flow 170 L/min 45 gal/min
Bulldozer Relief Valve Setting 24 100 kPa 3,500 psi
Tilt Cylinder Relief Valve Setting 24 100 kPa 3,500 psi
Ripper (Lift) Relief Valve Setting 24 100 kPa 3,500 psi
Ripper (Pitch) Relief Valve Setting 24 100 kPa 3,500 psi
Steering 39 200 kPa 5,700 psi
• Steering Pump output measured at 2,300 rpm and
30 000 kPa (4,351 psi).
• Implement Pump output measured at 1,850 rpm and
6895 kPa (1,000 psi).
• Electro-hydraulic pilot valve assists operations of ripper
and dozer controls. Standard hydraulic systems includes
four valves.
• Complete system consists of pump, tank with filter,
oil cooler, valves, lines, linkage and control levers.
Engine
Engine Model Cat C15 ACERT
Gross Power 259 kW 347 hp
Flywheel Power 231 kW 310 hp
Net Power – Caterpillar 231 kW 310 hp
Net Power – ISO 9249 231 kW 310 hp
Net Power – SAE J1349 229 kW 307 hp
Net Power – EU 80/1269 231 kW 310 hp
Net Power – DIN 70020 322 PS
Bore 137 mm 5.4 in
Stroke 172 mm 6.75 in
Displacement 15.2 L 928 in 3
• Engine ratings apply at 1,850 rpm.
• Net power advertised is the power available at the flywheel
when the engine is equipped with fan, air cleaner, muffler,
and alternator.
• No derating required up to 3658 m (12,000 ft) altitude,
beyond 3658 m (12,000 ft) automatic derating occurs.
Service Refill Capacities
Fuel Tank 643 L 170 gal
Cooling System 77 L 20.3 gal
Engine Crankcase* 38 L 10 gal
Power Train 155 L 41 gal
Final Drives (each) 12.5 L 3.3 gal
Roller Frames (each) 65 L 17.2 gal
Pivot Shaft Compartment 40 L 10.6 gal
Hydraulic Tank 75 L 19.8 gal
Variable Fan Hub 3.1 L 0.82 gal
* With oil filters.
Weights
Operating Weight 38 488 kg 84,850 lb
Shipping Weight 29 553 kg 65,152 lb
• Operating Weight: Includes hydraulic controls, blade tilt
cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab,
SU-Blade, Single-Shank Ripper, 560 mm (22 in) MS shoes,
and operator.
• Shipping Weight: Includes coolant, lubricants, 20% fuel,
ROPS, FOPS cab, and 560 mm (22 in) MS shoes.