Milton CAT D7E - Manual (Page 8)

8
Work Tools
Designed for performance and versatility.
Dozer Blades
The D7E features a robust, single lift cylinder design.
The single cylinder delivers the same power as a dual-cylinder
system, but with fewer than half the components. Blade
stability is excellent, supported by L-shaped push arms.
Dozer blade capacity is the same as previous models,
although the D7E blade enhances durability with
thicker plating.
Blade Options
Universal Blade
Semi-Universal Blade
Straight Blade
Angle Blade
Rear Attachments
Distributed hydraulics and commonality among D7E rear
Work Tools help maximize productivity and efficiency.
A well-balanced machine design means counterweights
are not needed when a rear work tool is not attached.
Ripper
The ripper on the D7E is placed closer to the machine for
improved balance. The Ripper Auto Stow function allows
the operator to automatically raise and position the ripper
for the next pass. Cast-in ripper mounts mean the machine
comes ready-to-pin from the factory, so a ripper can be
mounted quickly and easily.
Winch
The hydraulically driven winch for the D7E features positive
load control with variable speed, a dual braking system, a
single lever control and a standard three roller fairlead.
Drawbar
The drawbar for the D7E is suited for a variety of
applications, including disks, compactors, chopper wheels,
pull-type scrapers and retrieving other equipment.
•
•
•
•
•
•
•