Milton CAT D7E - Manual (Page 13)

13
Dimensions
All dimensions are approximate
STD LGP
1 Track Gauge 1981 mm 78 in 2286 mm 90 in
2 Width of Tractor over Trunnions 2880 mm 113 in 3423 mm 135 in
Width of Tractor without Trunnions (std. shoes) 2591 mm 102 in 3200 mm 126 in
3 Machine Height from Tip of Grouser
Top of Stack 3365 mm 132 in 3365 mm 132 in
Top of Standard Cab 3392 mm 134 in 3392 mm 134 in
From Ground Face of Shoe 3322 mm 131 in 3322 mm 131 in
4 Length of Track on Ground 3016 mm 119 in 3450 mm 136 in
5 Length of Basic Tractor 4608 mm 181 in 4608 mm 181 in
With the following attachments add to basic tractor length:
Ripper (with tip at ground line)
1391 mm 55 in N/A
Ripper (with tip fully raised) 1222 mm 48 in N/A
Winch 1032 mm 41 in 1032 mm 41 in
Drawbar 270 mm 10.6 in 270 mm 10.6 in
S Blade 977 mm 38 in N/A
SU Blade 1187 mm 47 in N/A
U Blade 1425 mm 56 in N/A
A Blade 1230 mm 48 in 1230 mm 48 in
6 Height of Grouser 70 mm 2.75 in 70 mm 2.75 in
7 Ground Clearance 472 mm 18.6 in 472 mm 18.6 in
Ground Contact Area (std. shoes) 3.68 m 2 5,698 in 2 6.31 m 2 9,792 in 2
Number of Shoes per Side 40 44
Standard Shoe Width and Type 610 mm 24 in 915 mm 36 in
MS MS
Ground Pressure 0.699 kg/cm 2 9.9 psi 0.446 kg/cm 2 6.3 psi
Pitch 215.9 mm 8.5 in 215.9 mm 8.5 in
Track Rollers/Side 7
Number of Carrier Rollers 2
8
2
8 Drawbar Height (grouser tip to center of clevis) 719 mm 28 in 719 mm 28 in
1
2
7
3
8
4
5
6