Milton CAT 16M - Manual (Page 21)

21 16M Motor Grader specifications
Ripper
Ripping depth, maximum 452 mm 17.8 in
Ripper shank holders 7
Shank holder spacing – min 445 mm 17.5 in
Shank holder spacing – max 500 mm 20 in
Penetration force 10 163 kg 22,140 lb
Pryout force 15 323 kg 33,788 lb
Machine length increase, 1610 mm 63.4 in
beam raised
Weights
Gross Vehicle Weight – base
– total 26 060 kg 57,452 lb
– front axle 7112 kg 15,679 lb
– rear axle 18 948 kg 41,773 lb
Gross Vehicle Weight – max
– total 35 672 kg 78,643 lb
– front axle 10 919 kg 24,073 lb
– rear axle 24 753 kg 54,570 lb
• Base operating weight calculated on standard machine
configuration with 18.00-25 12PR (G-2) tires, full fuel tank,
coolant, lubricants and operator.
Standards
ROPS/FOPS ISO 3471/ISO 3499
Steering ISO 5010:1992
Brakes SO 3450
Sound ISO 6394/ISO 6395
• The static operator sound pressure level measured according
to ISO 6394:1998 for a cab offered by Caterpillar, when properly
installed, maintained and tested with doors and windows
closed and hydraulic fan at maximum speed, is 72 dB(A).
• The dynamic spectator sound power level for the standard
machine measured according to ISO 6395:1988 with no sound
suppression package and hydraulic fan running at maximum
speed is 111 dB(A). When machine is equipped with sound
suppression package and hydraulic fan running at 70% of
maximum speed, machine sound measured is less than
108 dB(A), complying with EU 2000/14/EC requirement.