Functions – Hyundai H-MS1101 User Manual
Page 18
H-MS1101 (
18
Functions
OPEN/CLOSE
Press OPEN/CLOSE button when power on, the disc tray is pushed out. Put the disc on the tray with
the title faced up. Press OPEN/CLOSE again to close the disc tray and the unit starts playing
automatically. (Without auto-play function for MP3 and JPEG discs).
STANDBY
When playing, press STANDBY button, the unit will be power-off and go to standby state; Press
STANDBY again, the unit will be switched on and start playing.
Warning: The power is not fully cut off at standby state. If the unit will not be used for a long time,
turn off the power by pressing the POWER button on the front panel.
Note: You can also switch off the unit by pressing POWER switch on the rear panel.
SOURCE SELECT
You can switch among various signal sources by pressing SOURCE SELECT button.
TITLE/AM/FM
When playing DVD disc, press TITLE/AM/FM button to open the title list (for some players – to open
the title menu).
In Radio mode press TITLE/AM/FM button to choose band – AM or FM.
V-MODE (or SWITCH)
Press V-MODE button to switch the video output mode (YUV-RGB, etc.)
AUDIO/MEMORY
When playing DVD with more than one audio language, press AUDIO/MEMORY button to select
you desired audio language.
In Radio mode use this button to save the current station into the player memory.
SUBTITLE/AUTO
When playing the disc with multi-subtitle function, press SUBTITLE/AUTO to select the subtitle
language.
In Radio receiving mode use this button to automatically adjust and save all stations with strong
signal.
ANGLE
When playing the disc with multi-angle, press ANGLE button to change the view angle.
MENU/MO/ST
When playing DVD disc, press MENU/MO/ST button once to open the disc menu.
In Radio mode use this button to select the Mono or Stereo mode.
CH PREV/NEXT
In Radio mode CH PREV/NEXT buttons for manual adjustment of stations with strong signal.
When playing DVD disc, press PREV to go to the previous chapter.
When playing SVCD, VCD, CD disc, press PREV to go to the previous track.
When playing DVD disc, press NEXT to go to the next chapter.
When playing SVCD, VCD, CD disc, press NEXT to go to the next track.