VEGA VEGABAR 87 Modbus and Levelmaster protocol - Quick setup guide - Manual (Page 14)

14
5 Set up with the display and adjustment module
VEGABAR 87 • Modbus and Levelmaster protocol
46330-EN-131125
6. Min. adjustment
In this menu item you carry out the min. adjustment for level
Enter the percentage value and the corresponding value for the min.
level.
The quick setup is finished.
5.3 Parameter adjustment - Extended adjustment
For technically demanding measuring points, you can carry out
extended settings in "Extended adjustment".
The main menu is divided into five sections with the following func-
tions:
Setup: Settings, e.g., for measurement loop name, application, units,
position correction, adjustment, signal output
Display: Settings, e.g., for language, measured value display, lighting
Diagnosis: Information, e.g. on instrument status, pointer, measure-
ment reliability, simulation
Additional adjustments: PIN, units SV 2, date/time, reset, copy
function
Info: Instrument name, hardware and software version, date of manu-
facture, device ID, sensor features
In the main menu point "Setup", the individual submenu points should
be selected subsequently and provided with the correct parameters
to ensure the optimum adjustment of the measurement. The menu
items are described in the following.
Setup
Menu item
Measurement loop name
Application
Units
Unit of measurement
Temperature unit
Position correction
Main menu