VEGA VEGAFLEX 83 Foundation Fieldbus Polished version - Manual (Page 45)

45
6 Set up with the display and adjustment module
VEGAFLEX 83 • Foundation Fieldbus
44224-EN-130910
Menu item Default value Modified value
Max. adjustment - Level Distance: 0.000 m(d) - note block-
ing distances
Min. adjustment - Level 0 %
Min. adjustment - Level Distance: Probe length - take dead
band into account
Accept adjustment of the level measurement? Yes
Max. adjustment - Interface 100 %
Max. adjustment - Interface Distance: 0.000 m(d) - note block-
ing distances
Min. adjustment - Interface 0 %
Min. adjustment - Interface Distance: Probe length - take dead
band into account
Integration time - Level 0.0 s
Integration time - Interface 0.0 s
Linearization type Linear
Linearization - Socket correction 0 mm
Linearization - Vessel height Probe length
Display
Menu item Default value Modified value
Language Order-specific
Displayed value 1 Filling height Level
Displayed value 2 Electronics temperature
Backlight Switched off
Diagnostics
Menu item Default value Modified value
Status signals - Function control Switched on
Status signals - Out of specification Switched off
Status signals - Maintenance Switched off
Device memory - Echo curve memory Stopped
Device memory - Measured value memory Started
Device memory - Measured value memory -
Measured values
Distance level, percentage value
level, reliability level, electronics
temperature
Device memory - Measured value memory - Re-
cording in time interval
3 min.
Device memory - Measured value memory - Re-
cording with measured value difference
15 %
Device memory - Measured value memory - Start
with measured value
Not active