VEGA VEGAFLEX 83 4 … 20 mA_HART two-wire PFA insulated - Manual (Page 42)

42
6 Set up with the display and adjustment module
VEGAFLEX 83 • 4 … 20 mA/HART two-wire
41834-EN-130612
Since scaling is very extensive, scaling of the level value was divided
into two menu items.
In menu item "Level 1" you define the scaling variable and the scaling
unit for the level value on the display, e.g. volume in l.
Since scaling is very extensive, scaling of the level value was divided
into two menu items.
In menu item "Level 2" you define the scaling format on the display
and the scaling of the measured level value for 0 % and 100 %.
Since scaling is very extensive, scaling of the interface value was
divided into two menu items.
In menu item "Interface 1" you define the scaling size and the scaling
unit for the interface value on the display, e.g. volume in l.
You can accept the scaling of the level measurement also for the
interface measurement. If you select "Yes", the current setting is
displayed.
If you have selected "No", you can enter the scaling for the interface
separately.
Setup - Scaling Level
Setup - Scaling Level 1
Setup - Scaling Level 2
Setup/Scaling Interface
Setup - Scaling Interface
(1)