VEGA VEGADIF 65 4 … 20 mA - Manual (Page 35)

35
5 Connecting to power supply
VEGADIF 65 • 4 … 20 mA
36236-EN-130417
9. Check the hold of the wires in the terminals by lightly pulling on
them
10. Connect the screen to the internal ground terminal, connect the
outer ground terminal to potential equalisation
11. Tighten the compression nut of the cable entry. The seal ring must
completely encircle the cable
12. Screw the housing cover back on
The electrical connection is hence finished.
Fig. 34: Connection steps 6 and 7
5.3 Single chamber housing
2
1
Display
4...20mA
1 2
Fig. 35: Electronics and connection compartment, single chamber housing
1 Spring-loaded terminals for voltage supply
2 Ground terminal for connection of the cable screen
Electronics and connec-
tion compartment