VEGA VEGAFLEX 81 Ship-building - Manual (Page 3)

3
1 General information
VEGAFLEX 81 • Cargo tank (crude oil)
39154-EN-130626
1 General information
1.1 General instructions
This mounting instructions manual provides the necessary guidelines
for correct mounting of level sensors VEGAFLEX 81 on ships.
The mounting instructions manual applies to the following sensors
with ship approval:
•
VEGAFLEX 81 .CM…
•
VEGAFLEX 81 .DM…
•
VEGAFLEX 81 .XM…
Take note of the type label of the sensor. Only the abovementioned
versions meet the special requirements for use on ships. The type
label is located on the instrument housing.
To ensure proper functioning of the instrument, take careful note of all
the information in this mounting instructions manual.
Mount the VEGAFLEX 81 exactly according to the instructions in this
manual.
Read this manual before selecting the mounting position. Take note
of existing installations and discuss the mounting with the shipyard
technicians.
Make all necessary information on the mounting position and installa-
tion conditions available to the shipyard.
You can find further information on technical data or setup in the
operating instructions of VEGAFLEX 81. This manual comes with the
instrument.
When using in hazardous areas take note of all relevant technical
data and special regulations of the Ex-specific safety instructions of
VEGAFLEX 81 as well as possible devices that supply power. The
approval documents are part of the scope of delivery for instruments
with Ex approval.
1.2 Type plate
The nameplate contains the most important data for identification and
use of the instrument:
Type plate