VEGA VEGABAR 54 4 … 20 mA_HART - Manual (Page 50)

50
10 Supplement
VEGABAR 54 • 4 … 20 mA/HART
36726-EN-130321
Damping (63 % of the input variable) 0 … 999 s, adjustable
Additional output parameter - temperature
Processing is made via output signal HART multidrop, Profibus PA and Foundation Fieldbus
Range
-50 … +150 °C (-58 … +302 °F)
Resolution 1 °C (1.8 °F)
Accuracy
Ʋ in the range of 0 … +100 °C
(+32 … +212 °F)
±3 K
Ʋ in the range of -50 … 0 °C
(-58 … +32 °F) and +100 … +150 °C
(+212 … +302 °F)
typ. ±4 K
Input variable
Adjustment
Adjustment range of the min./max. adjustment relating to the nominal measuring range:
Ʋ Percentage value -10 … 110 %
Ʋ Pressure value -20 … 120 %
Adjustment range of the zero/span adjustment relating to the nominal measuring range:
Ʋ zero -20 … +95 %
Ʋ Span -120 … +120 % 10)
Ʋ Difference between zero and span max. 120 % of the nominal range
Recommended max. turn down 10 : 1 (no limitation)
Nominal measuring ranges and overload capability in bar/kPa
The specifications are only an overview and refer to the measuring cell. Limitations due to the ma-
terial and version of the process fitting are possible. The specifications on the nameplate apply.
Nominal range Overload capacity, max.
pressure
Overload capacity, min. pres-
sure
Gauge pressure
0 … +0.1 bar/0 … +10 kPa
+15 bar/+1500 kPa -0.2 bar/-20 kPa
0 … +0.2 bar/0 … +20 kPa +20 bar/+2000 kPa -0.4 bar/-40 kPa
0 … +0.4 bar/0 … +40 kPa +30 bar/+3000 kPa -0.8 bar/-80 kPa
0 … +1 bar/0 … +100 kPa +35 bar/+3500 kPa -1 bar/-100 kPa
0 … +2.5 bar/0 … +250 kPa +50 bar/+5000 kPa -1 bar/-100 kPa
0 … +5 bar/0 … +500 kPa +65 bar/+6500 kPa -1 bar/-100 kPa
0 … +10 bar/0 … +1000 kPa +90 bar/+9000 kPa -1 bar/-100 kPa
0 … +25 bar/0 … +2500 kPa +130 bar/+13 MPa -1 bar/-100 kPa
0 … +60 bar/0 … +6000 kPa +200 bar/+20 MPa -1 bar/-100 kPa
-1 … 0 bar/-100 … 0 kPa +35 bar/+3500 kPa -1 bar/-100 kPa
-1 … +1.5 bar/-100 … +150 kPa +50 bar/+5000 kPa -1 bar/-100 kPa
-1 … +5 bar/-100 … +500 kPa +65 bar/+6500 kPa -1 bar/-100 kPa
10) Values less than -1 bar cannot be set.